Cisco MQC HQF strict priority

policy-map FIFO
class MYCLASS_CM
priority 100
class MARK_CM
bandwidth remaining percent 10

Rack1R1(config-pmap-c)#do sh policy-map int
Serial1/1

Service-policy output: FIFO

queue stats for all priority classes:

queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0

Class-map: MYCLASS_CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: none

    Priority: 100 kbps

, burst bytes 2500, b/w exceed drops: 0

Rack1R1(config-pmap-c)#policy-map FIFO
Rack1R1(config-pmap)# class MARK_CM
Rack1R1(config-pmap-c)#no bandwidth remaining percent 10
Rack1R1(config-pmap-c)#policy-map FIFO
Rack1R1(config-pmap)# class MYCLASS_CM
Rack1R1(config-pmap-c)#priority
Rack1R1(config-pmap-c)# class MARK_CM
Rack1R1(config-pmap-c)#bandwidth 10
bandwidth kbps/percent command cannot co-exist with strict priority or with priority level in the same policy-map

policy-map FIFO
class MYCLASS_CM
priority
class MARK_CM
bandwidth remaining percent 10
class class-default
fair-queue

Rack1R1(config-pmap-c)#do sh policy-map int
Serial1/1

Service-policy output: FIFO

queue stats for all priority classes:

queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0

Class-map: MYCLASS_CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: none

    Priority: Strict

, burst bytes 1500, b/w exceed drops: 0

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s